| Signal isolators and converters (K-line, 6.2 mm) | K109S, K109UI, K109PT, K109TC, K109LV, K121 | Isolate and convert 4–20 mA, 0–10 V, Pt100, thermocouple, shunt mV; K121 is 2-wire loop-powered, ATEX Zone 2 | Quantity, input/output ranges, supply voltage |
| Universal converters (Z-line) | Z109REG2-1, Z170REG-1, Z-SG3 | One model for TC/RTD/mA/V with alarm relay; Z170REG-1 splits one signal into two isolated outputs; Z-SG3 reads up to 4 load cells to 4–20 mA and Modbus RTU | Sensor types, number of loops, relay needed or not |
| Head-mount temperature transmitters | T121, T120 | Pt100 or thermocouple to 4–20 mA, 2-wire isolated, fits DIN B sensor heads | Sensor type, range, quantity |
| Remote I/O, Modbus RTU (Z-PC, 17.5 mm) | Z-4AI, Z-8AI, Z-3AO, Z-10-D-IN, Z-10-D-OUT, Z-4RTD2, Z-8TC-1 | Expand any PLC or SCADA over RS-485; hot-swap on IDC10 bus | I/O count by type, PLC brand, bus length |
| Remote I/O, Ethernet (R-series) | R-16DI-8DO, R-series Modbus TCP, PROFINET "-P", EtherNet/IP range | Ethernet I/O with pass-through to RS-485 devices | Protocol, I/O count, one or two Ethernet ports |
| Gateways and serial device servers | Z-KEY, Z-KEY-WIFI, R-KEY-LT | Modbus RTU ↔ TCP, virtual COM, up to 8 TCP clients; UL certified | Number of serial devices, TCP clients, Wi-Fi or wired |
| Data loggers and remote alarms | Z-LTE (4G), Z-GPRS3, Z-LOGGER3, MyALARM3 Cloud | Poll Modbus devices, log to micro SD, alarm by SMS/e-mail, push by FTP/HTTP/MQTT | Site count, signals per site, mobile network, SCADA or cloud target |
| Energy meters and power analysers | S504C-6 (MID option), S534, S604E, S604E-ROG, R204 + RC160 Rogowski | Three-phase kWh with RS-485 Modbus; Rogowski coils fit without opening the busbar; R204 adds MQTT and UL | Current range, CT or Rogowski, MID required or not, protocol |
| Current transducers | T201DCH-LP | DC and AC TRMS to ±300 A by Hall effect, 4–20 mA out – batteries, solar, UPS | Current range, DC or AC, quantity |