T32.10 Head-Mount Temperature Transmitter, HART

Part number T32.10.000-SZ-Pt100-4W

Head-mounted digital transmitter for RTD and thermocouple, 4–20 mA HART 7, accuracy ±0.1 K, galvanic isolation, SIL2 (SIL3 redundant), Ex i/Ex d.

CE
ATEX
IECEx
SIL2
HART 7

Request a quote Email this part number

Overview

The WIKA T32 is a head-mounted temperature transmitter for Pt100/Pt1000, thermocouple, ohm and mV inputs, converting the sensor signal to 4–20 mA with HART 7 communication. Accuracy is ±0.1 K for RTDs with full galvanic isolation and sensor monitoring (break and short-circuit per NAMUR NE 89). The T32.10 fits DIN B connection heads such as the WIKA BSZ and is available in intrinsically safe and flameproof versions; the T32.11 is the DIN-rail variant. SIL2 certification per IEC 61508 allows use in safety loops, and configuration is done over HART with WIKA's DTM or any FDT frame. Typically supplied pre-configured and installed in TR10 assemblies.

Key features

Inputs: Pt100/Pt1000 (2/3/4-wire), TC (B, E, J, K, N, R, S, T, L, U), ohm, mV
Accuracy ±0.1 K (Pt100), galvanic isolation 1.5 kV, NAMUR NE 89 sensor monitoring
4–20 mA HART 7 output, loop-powered 10–30 V DC
T32.10 head mount (DIN B) or T32.11 DIN rail; Ex i and Ex d versions
SIL2 (SIL3 redundant) per IEC 61508; ATEX, IECEx, FM, CSA

Typical applications

4–20 mA conversion inside RTD and thermocouple assemblies
Retrofit of analog loops without changing field sensors
Safety-related temperature points
Long cable runs where sensor signals need isolation

Industries

Technical specifications — T32.10.000-SZ-Pt100-4W

Measurement
Inputs	RTD, TC, ohm, mV (1 input)
Accuracy	±0.1 K (Pt100), ±0.5 K (TC)
Isolation	1.5 kV AC input/output
Sensor monitoring	Break and short per NE 89
Output
Signal	4–20 mA HART 7
Power	10–30 V DC loop
Configuration	HART, DTM/FDT, WIKA T-Soft
Mounting
T32.10	Head mount DIN B (44 mm)
T32.11	DIN rail
Housing	Plastic, encapsulated
Environment
Ambient temperature	-40…+85 °C
Protection	IP00 (in head IP65/66)
Approvals	ATEX, IECEx, FM, CSA, SIL2

Specifications are summarised from the manufacturer's documentation for selection purposes. Always confirm against the current datasheet before design-in; we send the datasheet and the exact ordering code with every quotation.

Related part numbers and alternatives

Part number	Relationship
`T15`	Basic programmable head transmitter without HART	Quote
`T53`	FOUNDATION Fieldbus / PROFIBUS PA head transmitter	Quote
`TMT82`	Endress+Hauser dual-input alternative	Quote

Not sure which variant you need? Send us the nameplate photo or the old part number and we will identify the current equivalent.

Supply, documentation and lead time

What you receive

Genuine WIKA product in original packaging
Commercial invoice and packing list; Certificate of Conformance on request
Datasheet, declaration of conformity and country of origin as issued by the manufacturer
Manufacturer warranty, period stated on the quotation

How we quote

Reply within one business day with price, lead time and stock position
Alternatives proposed when they improve price or delivery
Incoterms of your choice: EXW Hai Phong, FOB/FCA, CIF/DAP to your site
Consolidated shipments for multi-line orders; export documentation for buyers outside Vietnam

Indicative HS code 9025.19 — final classification is confirmed on the commercial invoice.

Frequently asked questions

What is the difference between the T32 and the T15?

The T15 is a programmable transmitter with 4–20 mA only, configured by PC software. The T32 adds HART 7 communication, higher accuracy, SIL2 and Ex approvals, and is the choice for process plants with DCS/HART integration.

Can the T32 be mounted in a non-WIKA connection head?

Yes. The T32.10 follows the DIN B 44 mm form factor used by most connection heads; we check the head model before quoting.

Is the T32 available from stock, and what is the lead time?

Non-Ex and Ex i versions are typically 1–2 weeks; we often supply them pre-configured inside TR10 assemblies. We confirm with the quotation.